![[ Back to EurekAlert! ]](http://www.eurekalert.org/images/back2e.gif){kind=small}
Public release date: 25-Mar-2013[ | E-mail |
Share ] Contact: Catherine Meyers
cmeyers@aip.org
301-209-3088
American Institute of Physics
Ultra-precision positioning is required for the success of many scientific applications, including manufacturing semiconductors, aligning optics and manipulating cells. One of the challenges of ultra-precise positioning is providing sufficient torque through small, precise angles. In a paper accepted for publication in the Review of Scientific Instruments, a journal of the American Institute of Physics, researchers describe a new rotary actuator that accurately delivers more torque than previous devices.
Like many other ultra-precise rotary actuators, the new device's action is driven by piezoelectric material, which converts electrical signals into mechanical movement. The researchers improved upon previous designs with a clamp that integrates the driving and stopping action and can be moved to different distances from the rotor's center. That gives the researchers both more power and control of the driving forces. Like rotating a bicycle wheel, it is easier to control the torque and speed of the wheel by varying both the force as well as the distance from the center that force is applied.
The researchers report approximately four-fold improvements in both maximum loading torque and accuracy over other piezoelectric actuators at the maximum driving frequency of the other devices. While the new device can be driven at higher frequencies, the resulting higher speeds mean less accuracy because the rotor is harder to stop due to the additional rotational inertia of the rotor. The researchers are working on a new clamping design to overcome that limitation.
###
Article: "Design and experimental research of a novel inchworm type piezo-driven rotary actuator with the changeable clamping radius," is published in the Review of Scientific Instruments.
Link: http://rsi.aip.org/resource/1/rsinak/v84/i1/p015006_s1
Authors: Hongwei Zhao (1), Lu Fu (1), Luquan Ren (2), Hu Huang (1), Zunqiang Fan (1), Jianping Li (1), and Han Qu (1).
(1) Jilin University, College of Mechanical Science & Engineering (2) Jilin University, Key Laboratory of Bionic Engineering (Ministry of Education)
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Public release date: 25-Mar-2013[ | E-mail |
Share ] Contact: Catherine Meyers
cmeyers@aip.org
301-209-3088
American Institute of Physics
Ultra-precision positioning is required for the success of many scientific applications, including manufacturing semiconductors, aligning optics and manipulating cells. One of the challenges of ultra-precise positioning is providing sufficient torque through small, precise angles. In a paper accepted for publication in the Review of Scientific Instruments, a journal of the American Institute of Physics, researchers describe a new rotary actuator that accurately delivers more torque than previous devices.
Like many other ultra-precise rotary actuators, the new device's action is driven by piezoelectric material, which converts electrical signals into mechanical movement. The researchers improved upon previous designs with a clamp that integrates the driving and stopping action and can be moved to different distances from the rotor's center. That gives the researchers both more power and control of the driving forces. Like rotating a bicycle wheel, it is easier to control the torque and speed of the wheel by varying both the force as well as the distance from the center that force is applied.
The researchers report approximately four-fold improvements in both maximum loading torque and accuracy over other piezoelectric actuators at the maximum driving frequency of the other devices. While the new device can be driven at higher frequencies, the resulting higher speeds mean less accuracy because the rotor is harder to stop due to the additional rotational inertia of the rotor. The researchers are working on a new clamping design to overcome that limitation.
###
Article: "Design and experimental research of a novel inchworm type piezo-driven rotary actuator with the changeable clamping radius," is published in the Review of Scientific Instruments.
Link: http://rsi.aip.org/resource/1/rsinak/v84/i1/p015006_s1
Authors: Hongwei Zhao (1), Lu Fu (1), Luquan Ren (2), Hu Huang (1), Zunqiang Fan (1), Jianping Li (1), and Han Qu (1).
(1) Jilin University, College of Mechanical Science & Engineering (2) Jilin University, Key Laboratory of Bionic Engineering (Ministry of Education)
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Source: http://www.eurekalert.org/pub_releases/2013-03/aiop-up032313.php
sherri shepherd sherri shepherd arkansas razorbacks trisomy 18 ozzie guillen ozzie guillen buster posey
কোন মন্তব্য নেই:
একটি মন্তব্য পোস্ট করুন